YANSEN MAGNET

MAGNETIC & PHYSICAL PROPERTIES OF YANSEN INJECTION MOLDED FERRITE WITH BINDER PA6
Property	Grade		YSS121-F	YSS121-E	YSS121-S	YSS122-LH	YSS121-B	YSS121-A	YSS121-C	YSS121-I	YSS121-M	YSS121-K	YSS121-D	YSS121-Q
Magnetic property			Isotropic		Anistrope
	Remance (Br)	Gs	1500-1700	1125-1325	2950-3100	2900-3040	2800-2950	2830-2950	2700-2800	2700-2780	2670-2750	2580-2700	2450-2600	2340-2440
	Remance (Br)	mT	150-170	113-133	295-310	290-304	280-295	283-295	270-280	270-278	267-275	258-270	245-260	234-244
	Coercive Force (Hcb)	Oe	1300-1600	1025-1225	2100-2400	2400-2600	2200-2500	2200-2500	2200-2500	2200-2500	2400-2600	2200-2500	2000-2300	2040-2240
	Coercive Force (Hcb)	kA/m	103-127	81-97	167-191	191-207	175-199	175-199	175-199	175-199	191-207	175-199	159-183	162-178
	Intrinsic Coercivity (Hcj)	Oe	2300-2600	2300-2600	2400-2800	2900-3400	2700-3100	2800-3300	2700-3100	2800-3300	3000-3500	2800-3300	2600-3000	≥2900
	Intrinsic Coercivity (Hcj)	kA/m	183-207	183-207	191-237	231-271	215-247	237-263	215-247	237-263	263-279	237-263	207-263	≥231
	Max.Magnetic Energy Product (（BH）max)	MGOe	0.59-0.69	0.32-0.42	2.2-2.4	2.05-2.25	1.96-2.15	2.0-2.15	1.75-1.94	1.80-1.91	1.76-1.86	1.65-1.79	1.50-1.70	1.3-1.5
	Max.Magnetic Energy Product (（BH）max)	kj/m2	4.7-5.5	2.5-3.3	17.5-19.1	16.3-17.9	15.6-17.1	15.9-17.1	13.9-15.4	14.3-15.2	14-14.9	13.1-14.3	11.9-13.5	10.3-11.9
	Reversible Temp. Coefficient of Br	%	/	/	-0.2	-0.2	-0.2	-0.2	-0.2	-0.2	-0.2	-0.2	-0.2	-0.2
	Reversible Temp. Coefficient of Hcj	%	/	/	0.15	0.15	0.15	0.15	0.15	0.15	0.15	0.15	0.15	0.15
Physical property	Density	g/cm3	≥2.05	≥2.05	3.75-3.85	3.73-3.83	3.65-3.75	3.62-3.72	3.55-3.65	3.5-3.6	3.48-3.58	3.45-3.55	3.3-3.4	3.22-3.32
	MFR(melt flow rate)	g/10min	≥100	≥100	≥60	≥150	≥50	≥80	/	≥90	≥90	≥100	/	≥100
	Molding shrinkage	%	0.8	0.8	0.41	0.41	0.41	0.41	0.44	0.57	0.57	0.6	0.65	0.75
	Water absorption	%	0.18	0.18	0.14	0.14	0.15	0.15	0.14	0.15	0.15	0.15	0.16	0.16
	Distortion temperature	℃	160	160	172	172	173	173	174	174	174	170	168	168
Mechanical property	Tensile strength	MPa	/	/	≥58	≥75	≥70	≥50	≥75	≥58	≥60	≥66	≥80	≥65
	Tensile strain	%	/	/	1.33	1.5	0.48	0.99	1.25	1.41	1.7	1.2	1.86	1.05
	Tensile modulus	GPa	/	/	25.2	21	29	18.6	23.9	18.4	19	20.3	18	16.4
	Bending strength	MPa	/	/	≥130	≥145	≥165	≥130	≥160	≥135	≥140	≥160	≥165	≥145
	Flexural strain	%	/	/	2.01	1.8	1.5	2.25	2.16	2.98	3.76	3.25	3.35	3.04
	Flexural modulus	GPa	/	/	21.6	8.9	24	18.1	21.2	16.7	17.5	18	15.8	14.5
Injection molding temperature		℃	245	245	295	280	285	270	305	280	280	265	300	245